If you’ve started using Solidworks for your 3D modeling, you’ve probably gathered a lot of Autocad drawings over the years. More than that, you’ll continue to use the same look in the drawing borders you create in Solidworks. Solidworks
You can import Autocad drawing borders AutoCAD course in Islamabad into Solidworks, but you need to do some preparation before trying. This arrangement ensures that you can copy back to Autocad in the future without the slightest problem. Let’s say you have an Autocad drawing preview open, and you’ll see the entire drawing border on the screen.
Start by making sure that the drawing border and title block, material list, and edit block are the only visible. You can leave a message in the name block. and edit later in Solidworks at any time, as well as drawing numbers. revision number and other textual information that may need to be included in every drawing you create.
Make sure your drawing borders are the actual size they should be. For example, if this is a D-sized drawing, draw a 24″ x 36″ rectangle around the drawing border and see if the borders fit. If not Resize the border until Locate the bottom left corner of the square you drew and move it and all drawing borders. Rectangle and all to position 0,0,0 in model space or paper space.
Then transfer each drawing unit. This includes text, linework, and images to the zero (0) layer. You can keep the old layer. But you might get annoyed in the future if you want to convert your drawn Solidworks back to Autocad. Keeping everything in one layer makes the conversion as easy as possible. Make sure to clear the Autocad drawing after converting everything to a single layer.
If you want to convert everything to a single layer You may need to blow up some blocks in your drawing. so you can reset their entities to layer zero. Then you might want to rebuild or blow up those blocks. Solidworks can read your text and block attributes if you choose to rebuild. If you have multiple lines on the border of your drawing Lets blow it up too. Leave the linework simple and adjust the line width later in Solidworks.
You should now be able to open Autocad drawings in Solidworks, and the Solidworks Conversion Wizard will guide you through the process of creating drawing borders. When your autocad course border appears on the screen in Solidworks, you can copy the entire Psychology Articles. Right-click to edit the sheet size. and place all borders in the Solidworks version of the paper area, then save the file as a new sheet format. That’s all!